Super Grip Cable Ties Weather Resistant

Super Grip Cable Ties Weather Resistant and Heat Stabilized Nylon 6.6Super Grip Cable Ties Weather Resistant and Heat Stabilized Nylon 6.6

 

Super Grip Cable Ties Weather Resistant and Heat Stabilized Nylon 6.6

  • El material resistente a la intemperie tiene mayor resistencia a los daños causados por la luz ultravioleta – cubierta o el uso al aire libre
  •   El calor de material estabilizado para aplicaciones de alta temperatura hasta (115 ° C) 239 ° F – uso en interiores
  •   Diseñado para agarrar el paquete firmemente para resistir el movimiento lateral del lazo una vez instalado
  •   Alta resistencia permite el empate para resistir las prácticas de instalación en bruto que se producen en entornos de MRR y de la construcción
  •   Delgado, de fuselaje ancho correa proporciona una flexibilidad que le permite adaptarse a agrupar manteniendo resistencia a la tracción
  •   Punta curva es fácil de aprender a partir de superficies planas y permite el roscado inicial más rápida para acelerar la instalación
  •   Montajes complementarios

Super Grip Cable Ties Weather Resistant and Heat Stabilized Nylon 6.6

  • Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use
  •  Heat stabilized material for high temperature applications up to 239°F (115°C) – indoor use
  •  Designed to grip the bundle tightly to resist lateral movement of the tie once installed
  •  High strength allows the tie to withstand rough installation practices that occur in MRO and construction environments
  •  Thin, wide strap body provides flexibility enabling it to conform to bundle while maintaining tensile strength
  •  Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
  •  Complementary mounts available

Super Grip Cable Ties Weather Resistant and Heat Stabilized Nylon 6.6

Weather Resistant Nylon 6.6

Miniature Cross Section

SG100M-C0

Intermediate Cross Section

SG150I-C0

Standard Cross Section

SG200S-C0

SG250S-C0

SG300S-C0

SG370S-C0

Light-Heavy Cross Section

SG350LH-L0

Heavy Cross Section

SG450H-L0

Heat Stabilized Nylon 6.6

Standard Cross Section

SG200S-M30

SG300S-M30

Light-Heavy Cross Section

SG350LH-TL30

Super Grip Cable Ties Weather Resistant and Heat Stabilized Nylon 6.6

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Electrico

Super Grip Cable Ties Nylon 6.6

Super Grip Cable Ties Nylon 6.6

Super Grip Cable Ties Nylon 6.6

SG100M-C, SG150I-C, SG200S-C, SG250S-C, SG300S-C, SG370S-C, SG350LH-L, SG450H-L

 

Super Grip Cable Ties Nylon 6.6

  • Para uso en interiores
  •  Diseñado para agarrar el paquete firmemente para resistir el movimiento lateral de la atar una vez instalado
  •  Alta resistencia permite el empate para resistir las prácticas de instalación ásperas que se producen en entornos de MRR y de la construcción
  •  Delgado, cuerpo ancho de la correa proporciona una flexibilidad que le permite ajustarse a agrupar manteniendo al mismo tiempo resistencia a la tracción
  •  Punta curva es fácil de aprender a partir de superficies planas y permite más rápido enhebrado inicial hasta la instalación de velocidad
  •  Producto homologado UL para su uso en plenum o tratamiento de aire espacios por NEC
  •  Montajes complementarios disponibles

Super Grip Cable Ties Nylon 6.6

  • For indoor use
  •  Designed to grip the bundle tightly to resist lateral movement of the tie once installed
  •  High strength allows the tie to withstand rough installation practices that occur in MRO and construction environments
  •  Thin, wide strap body provides flexibility enabling it to conform to bundle while maintaining tensile strength
  •  Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation
  •  UL Listed for use in plenum or air handling spaces per NEC
  •  Complementary mounts available.

Super Grip Cable Ties Nylon

Miniature Cross Section – Plenum-Rated

SG100M-C

Intermediate Cross Section – Plenum-Rated

SG150I-C]

Standard Cross Section – Plenum-Rated

SG200S-C

SG250S-C

SG300S-C

SG370S-C

Light-Heavy Cross Section – Plenum-Rated

SG350LH-L

Heavy Cross Section – Plenum-Rated

SG450H-L

Super Grip Cable Ties Nylon

Etiquetado con: , , , , , , , , , , , , , ,
Publicado en: Panduit Electrico

Pan Ty Marker and Flag Ties

Pan Ty Marker and Flag Ties

Pan Ty Marker and Flag Ties

PLF1M-C, PLF1MA-C, PLF1MB-C, PLF1MC-M, PLM1M-C, PLM2M-C, PLM2S-C, PLM4S-C, PL2M2S-L, PL3M2S-L, PLF1M-C0, PLF1MA-M0, PLM1M-C0, PLM2M-M0, PLM2S-C0, PLM4S-D0, PL2M2S-L0, PL3M2S-D0, PLF1M-M69, PLM1M-M69

 

Pan Ty Marker and Flag Ties

  • Material de nylon natural para material resistente al uso en interiores
  • El tiempo tiene una mayor resistencia a los daños causados por la luz ultravioleta – material retardante de llama uso en interiores o al aire libre
  • tiene un grado de inflamabilidad de UL94V-0 – para uso en interiores
  • utilizados para sujetar e identificar los paquetes al mismo tiempo
  • One- construcción de una pieza para un rendimiento y confiabilidad constantes
  • se pueden marcar con rotuladores Panduit
  • etiquetas imprimibles informáticos impronta de encargo con el texto, símbolos o marcas comerciales disponibles utilizando Panduit Servicio de Estampado en Caliente personalizada
  • punta curva es fácil recoger de superficies planas y permite enhebrado inicial más rápida para acelerar la instalación

Pan Ty Marker and Flag Ties

  • Natural nylon material for indoor use
  •  Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use
  •  Flame retardant material has a flammability rating of UL 94V-0 – for indoor use
  •  Used to fasten and identify bundles at the same time
  •  One-piece construction for consistent performance and reliability
  •  Can be marked with Panduit marker pens on page B1.51 or computer printable labels
  •  Custom imprinting with text, symbols, or trademarks available using Panduit Custom Hot Stamping Service.
  •  Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation

Pan Ty Marker and Flag Ties

Nylon 6.6

Miniature Cross Section

PLF1M-C

PLF1MA-C

PLF1MB-C

PLF1MC-M

PLM1M-C

PLM2M-C

Standard Cross Section

PLM2S-C

PLM4S-C

PL2M2S-L

PL3M2S-L

Weather Resistant Nylon 6.6

Miniature Cross Section

PLF1M-C0

PLF1MA-M0

PLM1M-C0

PLM2M-M0

Standard Cross Section

PLM2S-C0

PLM4S-D0

PL2M2S-L0

PL3M2S-D0

Flame Retardant Nylon 6.6

Miniature Cross Section

PLF1M-M69

PLM1M-M69

Pan Ty Marker and Flag Ties

Pan Ty Marker and Flag Ties

 

Etiquetado con: , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Electrico

Pan Ty Push Mount Ties

Pan Ty Push Mount Ties 

Pan Ty Push Mount Ties

PLP1.5I-C, PLP1S-M, PLP1.5S-M, PLP2S-C, Intermediate Cross Section PLP1.5I-M0, PLP1S-M0, PLP2S-M0, PLP1.5I-M30, PLP1S-M30, PLP2S-M30,

 

Pan Ty Push Mount Ties 

  • Material de nylon natural para uso en interiores
  •   El material resistente a la intemperie tiene mayor resistencia a los daños causados por la luz ultravioleta – cubierta o el uso al aire libre
  •   El calor de material estabilizado para aplicaciones de alta temperatura hasta (115 ° C) 239 ° F – uso en interiores
  •   Diseño sin alas permite empate para ser utilizado en espacios confinados
  •   Cable tie, montaje y sujetador en una sola pieza
  •   Empuje económico montar lazos se utilizan para unir los paquetes a otra superficie como un panel plano
  •   Ancla es fácilmente a presión en un agujero y cerraduras preformado en su lugar
  •   Punta curva es fácil de aprender a partir de superficies planas y permite el roscado inicial más rápida para acelerar la instalación

Pan Ty Push Mount Ties

  • Natural nylon material for indoor use
  •  Weather resistant material has greater resistance to damage caused by ultraviolet light – indoor or outdoor use
  •  Heat stabilized material for high temperature applications up to 239°F (115°C) – indoor use
  •  Wingless design allows tie to be used in confined spaces
  •  Cable tie, mount, and fastener in a single part
  •  Economical push mount ties are used to attach bundles to another surface such as a flat panel
  •  Anchor is easily pressed into a pre-formed hole and locks in place
  •  Curved tip is easy to pick up from flat surfaces and allows faster initial threading to speed installation

Nylon 6.6

Intermediate Cross Section

PLP1.5I-C

Standard Cross Section

PLP1S-M

PLP1.5S-M

PLP2S-C

Weather Resistant Nylon 6.6

Intermediate Cross Section

PLP1.5I-M0

Standard Cross Section

PLP1S-M0

PLP2S-M0

Heat Stabilized Nylon 6.6

Intermediate Cross Section

PLP1.5I-M30

Standard Cross Section

PLP1S-M30

PLP2S-M30

Pan Ty Push Mount Ties

 

 

 

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Electrico

Cable Routing Troughs

Cable Routing Troughs

Cable Routing Troughs

Cable Routing Troughs

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx, soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica

Bebederos de encaminamiento de cable

Cable Routing Troughs

  • Proporcionar caminos hacia la ruta de cables en una fila de la parrilla
  • Provide pathways to route cables in a rack line-up

Numero de Parte PANDUIT:

CMLT19:

  • 4 canal inferior RU con 1,3″ radio de curvatura se monta en la parte inferior de un estándar de 19″
    Rack EIA. Dimensiones: 8.0″ H x 19,0″ W x 4,5 «D (203 x 483 x 114 mm).
  • 4 RU lower trough with 1.3″ bend radius mounts to the bottom of a standard 19″
    EIA rack. Dimensions: 8.0″H x 19.0″W x 4.5″D (203mm x 483mm x 114mm).

CMUT19:

  • 2 canal superior RU con 1,3″ curva radio se monta en la parte superior de un estándar
    19″ EIA del estante. Dimensiones: 3.5. «H x 19,0 » W x 4.5″ D (89 x 483 x 114 mm).
  • 2 RU upper trough with 1.3″ bend radius mounts to the top of a standard 19″ EIA rack. Dimensions: 3.5.»H x 19.0″W x 4.5″D (89mm x 483mm x 114mm).

CMT4:

  • 4 RU enrutamiento a través del cable. Dimensiones: 6,9″ H x 19,0″ W x 4,5 «D (176 x 483 x 114 mm).
  • 4 RU cable routing trough. Dimensions: 6.9″H x 19.0″W x 4.5″D (176mm x 483mm x 114mm).

Tijuana, Tecate, Mexicali, Ensenada, Rosarito, La Paz, Los Cabos, San Luis Rio Colorado

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Datacomm

Vertical DRings

Vertical DRings

Vertical DRings

CMVDR2S, CMVDRC, CMVDR2, CMVDR1S

Vertical DRings

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx, soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica

Verticales D-Rings

Vertical D-Rings

  • Cable patentado de anillo del Gerente
  • Espaciamiento de agujero EIA estándar permite producto ser montado a cualquier rack standard
  • Material flexible permite brazo gire el cable tan entero paquete puede ser insertado y retirado
  • Bordes redondeados evitar daños al aislamiento del cable
  • 1/4″(M6) orificio de montaje permite una variedad de tornillos Asegure el anillo en D a una superficie
  • Crear un camino estructurado y permite el acceso abierto
  • Material: Policarbonato ignífugo negro
  • Patented cable manager ring
  • Standard EIA hole spacing allows product to be mounted to any standard rack
  • Flexible material allows arm to rotate so entire cable bundle can be inserted and removed
  • Rounded edges prevent damage to cable insulation
  • 1/4″ (M6) mounting hole allows for a variety of screws to secure the D-ring to a surface
  • Create a structured pathway and allows for open access
  • Material: Black Flame Retardant Polycarbonate
Numero de Parte PANDUIT:
CMVDR1:
  • D-anillo vertical. Exterior dimensiones 5,72″ L x 2,05 » W (145.3 mm x 52,1 mm).
  • Vertical D-ring. Outside dimensions 5.72″L x 2.05″W (145.3mm x 52.1mm).

CMVDR1S:

  • D-anillo vertical. Exterior dimensiones 3,26″ L x 2,05 » W (82.8 mm x 52,1 mm).
  • Vertical D-ring. Outside dimensions 3.26″L x 2.05″W (82.8mm x 52.1mm).

CMVDR2:

  • D-anillo vertical. Exterior dimensiones 5,72″ L x 3,30 » W (145.3 mm x 83,8 mm).
  • Vertical D-ring. Outside dimensions 5.72″L x 3.30″W(145.3mm x 83.8mm).

CMVDR2S:

  • D-anillo vertical. Exterior dimensiones 3,26″ L x 3,30 » W (82.8 mm x 83,8 mm).
  • Vertical D-ring. Outside dimensions 3.26″L x 3.30″W (82.8mm x 83.8mm).

CMVDRC:

  • Centro montado vertical anillo en D para enrutamiento cables entre dos estantes adyacentes. Requiere 8.25″ espaciado entre las líneas centrales de la agujeros de montaje del rack adyacentes. Exterior dimensiones 5,66″ L x 8,75 » W (143.8 mm x 222.3 mm).
  • Center mounted vertical D-ring for routing cables between two adjacent racks. Requires 8.25″ spacing between the center lines of the adjacent rack’s mounting holes. Outside dimensions 5.66″L x 8.75″W (143.8mm x 222.3mm).

Tijuana, Tecate, Mexicali, Ensenada, Rosarito, La Paz, Los Cabos, San Luis Rio Colorado

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Datacomm

Open Access Horizontal Cable Managers

Open Access Horizontal Cable Managers

Open Access Horizontal Cable Managers

CMPH1, CMPH2, CMPHF1, CMPHHF1, CMPHF2, CMPHH2, CMPH1C, CMPH2C

Open Access Horizontal Cable Managers

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx, soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica

Administradores de Cable Horizontal libre acceso ™

Open Access Horizontal Cable Managers

  • Anillo en D gestores proporciona una manera abierta y eficiente para gestión de cable
  • Diseño patentado de anillo en D proporciona flexibilidad para movimientos fáciles, agrega y cambia
  • Tapa complemento opcional
  • Los agujeros de paso permiten frente al cableado posterior
  • Monte a 19″ EIA racks y gabinetes
  • Hardware incluido
  • D-ring managers provide an open and efficient way to manage cable
  • Patented D-ring design provides flexibility for easy moves, adds, and changes
  • Optional snap-on cover
  • Pass-through holes allow front to rear cabling
  • Mount to 19″ EIA racks and cabinets
  • Hardware included

Numero de Parte PANDUIT:

CMPH1:

  • Anillos en D instalados en paneles. 1.7″ H x 19,0″ W x 8.6 «D (44 x 483 x 218 mm).
  • D-rings installed on panels. 1.7″H x 19.0″W x 8.6″D (44mm x 483mm x 218mm).

CMPH2:

  • Anillos « instalado en el panel. 3.5″ H x 19,0″ W x 8.6 «D (88 x 483 x 218 mm).
  • D-rings installed on panel. 3.5″H x 19.0″W x 8.6″D (88mm x 483mm x 218mm).

CMPHF1:

  • Anillos « instalado en el panel. 1.7″ H x 19,0″ W x 3.4 «D (44 x 483 x 87 mm).
  • D-rings installed on panel. 1.7″H x 19.0″W x 3.4″D (44mm x 483mm x 87mm).

CMPHHF1:

  • Anillos « instalado en el panel. 1.7″ H x 19,0″ W x 5.7 «D (44 x 483 x 144 mm).
  • D-rings installed on panel. 1.7″H x 19.0″W x 5.7″D (44mm x 483mm x 144mm).

CMPHF2:

  • Anillos « instalado en el panel. 3.5″ H x 19,0″ W x 3.4 «D (88 x 483 x 87 mm).
  • D-rings installed on panel. 3.5″H x 19.0″W x 3.4″D (88mm x 483mm x 87mm).

CMPHH2:

  • Anillos « instalado en el panel. 3.5″ H x 19,0″ W x 5.7 «D (88 x 483 x 144 mm).
  • D-rings installed on panel. 3.5″H x 19.0″W x 5.7″D (88mm x 483mm x 144mm).

CMPH1C:

  • Complemento en cubierta para los paneles de 1 RU D-anillo. Anchura 19,4″(492mm).
  • Snap-on cover for 1 RU D-ring panels. Width 19.4″ (492mm).

CMPH2C:

  • Tapa SNAP para 2 paneles de anillo en D-RU. Anchura 19,4″(492mm).
  • Snap-on cover for 2 RU D-ring panels. Width 19.4″ (492mm).

Tijuana, Tecate, Mexicali, Ensenada, Rosarito, La Paz, Los Cabos, San Luis Rio Colorado

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Datacomm

PatchRunner High Capacity Horizontal Cable Managers

PatchRunner High Capacity Horizontal Cable Managers

PatchRunner High Capacity Horizontal Cable Managers

PEHF3, PEHF4, PEHF2

PatchRunner High Capacity Horizontal Cable Managers

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx, soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica

Administradores de Cable Horizontal de alta capacidad PatchRunner ™

PatchRunner High Capacity Horizontal Cable Managers

  • Gestión de cables en los interruptores con tarjetas verticales
  • Cable curvo gestión dedos soporte cables como transición a la vía vertical
  • Puede utilizarse para crear vías de cable para la encaminamiento de cable
  • Cubierta con bisagras de acero proporciona fácil acceso a la vía
  • Agujeros de paso en la parte superior y la parte posterior del Gerente
  • Monte a 19″ EIA racks y gabinetes
  • Hardware de montaje incluido
  • Manage cables on switches with vertical cards
  • Curved cable management fingers support cables as they transition to the vertical pathway
  • Can be used to create cable pathways for routing cable
  • Steel hinged cover provides easy access to pathway
  • Pass-through holes on top and back of manager
  • Mount to 19″ EIA racks and cabinets
  • Mounting hardware included

Numero de Parte PANDUIT:

PEHF2:

  • PatchRunner alta Capacidad Horizontal Gerente de cable con bisagra tapa, frente 2, RU. Dimensiones: 3,5″ H x 18,9″ W x 9,8″ D * (89 x 480 mm x 250 mm *) * Profundidad puede telescopio de montaje en rack cara 4,4″(112mm) a 7,6″(193mm).
  • PatchRunner ™ High Capacity Horizontal Cable Manager with hinged cover, front only, 2 RU. Dimensions: 3.5″H x 18.9″W x 9.8″D* (89mm x 480mm x 250mm*) *Depth can telescope from rack mounting face 4.4″ (112mm) to 7.6″ (193mm).

PEHF3:

  • PatchRunner alta Capacidad Horizontal Gerente de cable con bisagra tapa, frente sólo 3 RU. Dimensiones: 5,2″ H x 18,9″ W x 9,8″ D * (133 x 480 mm x 250 mm *) * Profundidad puede telescopio de montaje en rack cara 4,4″(112mm) a 7,6″(193mm).
  • PatchRunner ™ High Capacity Horizontal Cable Manager with hinged cover, front only, 3 RU. Dimensions: 5.2″H x 18.9″W x 9.8″D* (133mm x 480mm x 250mm*) *Depth can telescope from rack mounting face 4.4″ (112mm) to
    7.6″ (193mm).

PEHF4:

  • PatchRunner alta Capacidad Horizontal Gerente de cable con bisagra tapa, frente 4, RU. Dimensiones: 7.0″ H x
    18,9″ W x 9,8″ D * (177 x 480 mm x 250 mm *) * Profundidad puede telescopio de montaje en rack cara 4,4″(112mm) a 7,6″(193mm).
  • PatchRunner ™ High Capacity Horizontal Cable Manager with hinged cover, front only, 4 RU. Dimensions: 7.0″H x 18.9″W x 9.8″D* (177mm x 480mm x 250mm*) *Depth can telescope from rack mounting face 4.4″ (112mm) to 7.6″ (193mm).

Tijuana, Tecate, Mexicali, Ensenada, Rosarito, La Paz, Los Cabos, San Luis Rio Colorado

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Datacomm

NetManager Horizontal Cable Managers

NetManager Horizontal Cable Managers

NetManager Horizontal Cable Managers

NCMHF2, NCMH2, NCMHF1

NetManager Horizontal Cable Managers

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx, soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica

Administradores de Cable Horizontal NetManager ®
NetManager ® Horizontal Cable Managers

  • Diseño patentado
  • Construcción de plástico ligera proporciona durabilidad y instalación fácil
  • Tapa frontal extraíble bisagras 180° hacia arriba o hacia abajo para permitir acceso sin quitar la tapa
  • Las superficies curvadas mantienen el radio de curvatura del cable
  • Los agujeros de paso permiten frente al cableado posterior
  • Construida en cable de retención retenedores en lugar de movimientos fáciles, agrega y cambia
  • Monte a 19″ EIA racks y gabinetes
  • Cubiertas, #12-24 y los tornillos de montaje M6 incluidos
  • Patented design
  • Lightweight plastic construction provides durability and easy installation
  • Removable front cover hinges 180° up or down to allow access without removing cover
  • Curved surfaces maintain cable bend radius
  • Pass-through holes allow for front to rear cabling
  • Built in cable retainers hold cable in place for easy moves, adds, and changes
  • Mount to 19″ EIA racks and cabinets
  • Covers, #12-24 and M6 mounting screws included

Numero de Parte PANDUIT:

NCMHF1:

  • 1.7 «H x 19.0» W x 3.7 «D (44 x 483 x 95 mm).
  • 1.7″H x 19.0″W x 3.7″D (44mm x 483mm x 95mm).

NCMHF2:

  • 3.5 «H x 19.0» W x 3.7 «D (88 mm x 483 mm x 95 mm).
  • 3.5″H x 19.0″W x 3.7″D (88mm x 483mm x 95mm).

NCMH2:

  • 3.5″ H x 19,0″ W x 9.8 «D (88 x 483 x 248 mm). Complemento en la tapa trasera.
  • 3.5″H x 19.0″W x 9.8″D (88mm x 483mm x 248mm). Snap-on rear cover.

Tijuana, Tecate, Mexicali, Ensenada, Rosarito, La Paz, Los Cabos, San Luis Rio Colorado

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Datacomm

NetManager High Capacity Horizontal Cable Managers

NetManager High Capacity Horizontal Cable Managers

NetManager High Capacity Horizontal Cable Managers

NM1, NM2, NM3, NM4, NMF1, NMF2, NMF3, NMF4, NM1B, NM2B, NM3B, NM4B:

NetManager High Capacity Horizontal Cable Managers

Contactenos en: www.innovative.com.mx Tel: (664) 621 33 36 / 621 30 09 ventas@innovative.com.mx, soporte@innovative.com.mx, Innovative Trade Center Tijuana, B. C. Distribuimos en toda la republica

Gerentes de alta capacidad Cable Horizontal NetManager

NetManager High Capacity Horizontal Cable Managers

  • Dedos detalle innovador pendiente hacia adentro hacia atrás de gerentes ofreciendo acceso sin obstáculos a red cableado para facilitar movimientos, agrega y cambia
  • Las aberturas grandes dedo delantero acomodar fácilmente categoría 6 y 10 GbE los cables, instalación a exceso de velocidad y reducir costes de mantenimiento
  • Espaciamiento de dedo trasero cable management utiliza abierto D-rings para mayor accesibilidad
  • Can be used to create large capacity horizontal pathways for routing cable
  • Patentado delantera y trasera de la cubierta embisagrada dual permite cable acceso sin quitar la tapa
  • Las superficies curvadas mantienen el radio de curvatura del cable
  • Los agujeros de paso permiten frente al cableado posterior
  • Construida en cable de retención retenedores en lugar de movimientos fáciles, agrega y cambia
  • Monte a 19″ EIA racks y gabinetes
  • Cubiertas, #12-24 y los tornillos de montaje M6 incluidos
  • Diseño adapta al ras al frente de la célula de alta NetRunner ® WMPVHC45E y WMPVHCF45E capacidad Gerentes verticales
  • Innovative inset fingers slope inward toward back of managers offering unobstructed access to network cabling for easier moves, adds, and changes
  • Large front finger openings easily accommodate Category 6 and 10 GbE cables, speeding installation and reducing maintenance costs
  • Rear cable management finger spacing utilizes open D-rings for greater accessibility
  • Can be used to create large capacity horizontal pathways for routing cable
  • Patented front and rear dual hinged cover allows cable access without removing cover
  • Curved surfaces maintain cable bend radius
  • Pass-through holes allow for front to rear cabling
  • Built in cable retainers hold cable in place for easy moves, adds, and changes
  • Mount to 19″ EIA racks and cabinets
  • Covers, #12-24 and M6 mounting screws included
  • Design fits flush to the front of the NetRunner ® High Capacity WMPVHCF45E and WMPVHC45E Vertical Managers

NetManager High Capacity Horizontal Cable Managers

Numero de Parte PANDUIT:

NM1:

  • Gerente de Cable horizontal alta capacidad delantero y trasero 1 Unidad de rack. 1.7″ H x 19,0 » W x 13,1″ D (44 x 482 mm x 332 mm).
  • Horizontal Cable Manager High Capacity Front and Rear 1 Rack Unit. 1.7″H x 19.0″W x 13.1″D (44mm x 482mm x
    332mm).

NM2:

  • Gerente de Cable horizontal alta capacidad delantero y trasero 2 Unidades de rack. 3.5″ H x 19,0 » W x 13,1″ D (88 x 482 mm x 332 mm).
  • Horizontal Cable Manager High Capacity Front and Rear 2 Rack Units. 3.5″H x 19.0″W x 13.1″D (88mm x 482mm x 332mm).

NM3:

  • Gerente de Cable horizontal alta capacidad delantera y trasera 3 Unidades de rack. 5,2″ H x 19,0 » W x 13,1″ D (133 x 482 mm x 332 mm).
  • Horizontal Cable Manager High Capacity Front and Rear 3 Rack Units. 5.2″H x 19.0″W x 13.1″D (133mm x 482mm x 332mm).

NM4:

  • Gerente de Cable horizontal alta capacidad frente y parte posterior 4 Unidades de rack. 7.0″ H x 19,0 » W x 13,1″ D (177 x 482 mm x 332 mm).
  • Horizontal Cable Manager High Capacity Front and Rear 4 Rack Units. 7.0″H x 19.0″W x 13.1″D (177mm x 482mm x 332mm).

NMF1:

  • Gerente de Cable horizontal alta capacidad frontal sólo 1 parrilla Unidad. 1.7″ H x 19,0″ W x 6.2 «D (44 x 482 x 157 mm).
  • Horizontal Cable Manager High Capacity Front Only 1 Rack Unit. 1.7″H x 19.0″W x 6.2″D (44mm x 482mm x 157mm).

NMF2:

  • Gerente de Cable horizontal alta capacidad frente sólo 2 Rack Unidades. 3.5″ H x 19,0″ W x 6.2 «D (88 x 482 x 157 mm).
  • Horizontal Cable Manager High Capacity Front Only 2 Rack Units. 3.5″H x 19.0″W x 6.2″D (88mm x 482mm x 157mm).

NMF3:

  • Gerente de Cable horizontal alta capacidad frente sólo 3 Rack Unidades. 5,2″ H x 19,0″ W x 6.2 «D (133 x 482 x 157 mm).
  • Horizontal Cable Manager High Capacity Front Only 3 Rack Units. 5.2″H x 19.0″W x 6.2″D (133mm x 482mm x 157mm).

NMF4:

  • Gerente de Cable horizontal alta capacidad frente sólo 4 Rack Unidades. 7.0″ H x 19,0″ W x 6.2 «D (177 x 482 x 157 mm).
  • Horizontal Cable Manager High Capacity Front Only 4 Rack Units. 7.0″H x 19.0″W x 6.2″D (177mm x 482mm x 157mm).

NM1B:

  • Frente a posterior paso por esconder el panel para NetManager Los administradores de alta capacidad Cable Horizontal, NM1 y NMF1.
  • Front to rear pass through blanking panel for NetManager ™ High Capacity Horizontal Cable Managers, NM1 and NMF1.

NM2B:

  • Frente a posterior paso por esconder el panel para NetManager Los administradores de alta capacidad Cable Horizontal, NM2 y NMF2.
  • Front to rear pass through blanking panel for NetManager ™ High Capacity Horizontal Cable Managers, NM2 and NMF2.

NM3B:

  • Frente a posterior paso por esconder el panel para NetManager Los administradores de alta capacidad Cable Horizontal, NM3 y NMF3.
  • Front to rear pass through blanking panel for NetManager ™ High Capacity Horizontal Cable Managers, NM3 and NMF3.

NM4B:

  • Frente a posterior paso por esconder el panel para NetManager Los administradores de alta capacidad Cable Horizontal, NM4 y NMF4.
  • Front to rear pass through blanking panel for NetManager ™ High Capacity Horizontal Cable Managers, NM4 and NMF4.

NetManager High Capacity Horizontal Cable Managers

Tijuana, Tecate, Mexicali, Ensenada, Rosarito, La Paz, Los Cabos, San Luis Rio Colorado

Etiquetado con: , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Publicado en: Panduit Datacomm
Descarga Aquí este Catálogo
Archivos
Subscribase a este sitio