UL AWM Style 3071, 3074,
3075, 3125 and 3126
600V, 200°C
(CSA Type SEW-2)
VW-1
Product Description
UL recognizes finer strands on the 150°C
rated wire. The Silicone insulation strips
clean and easy. The glass braid provides
additional abrasion resistance and is treated
to prevent fraying. Recommended for
high-temperature applications in motors,
lighting fixtures, clothes dryers, stoves,
therapeutic and electronic devices. These
wires can be used with Class 130(B), 155(F)
or 180(H) insulation systems.
Recommended maximum baking cycles:
24 hours @ 410°F (210°C)

Numero de Parte Belden: 32418, 32416, 32414, 32412, 32410, 30808, 30806, 30804, 30802, 30801, 30890, 30800, 30830, 30840

UL AWM Style 3212, 3213, 3214
600V, 150°C
(CSA Type AWM)
Product Description
The 333 series of braidless Silicone 150°C
lead wire features easy and clean stripping
without the problems associated with glass
braid wire. It has excellent physical and
mechanical strength properties. Braidless
Silicone lead wire is also recommended
for consideration in applications requiring
Class 155(F) or Class 180(H) materials.
Recommended for high-temperature
applications in motors, lighting fixtures,
clothes dryers, stoves, therapeutic and
electronic devices. It is recommended that
varnish compatibility be checked before
production. Some rigid varnishes may cause
cracking when the wire is severely bent.
Recommended maximum baking cycles:
24 hours @ 410°F (210°C)

UL AWM Style 3135
600V, 200°C
Product Description
The 334 Series is for use only in totally
enclosed systems.
Recommended maximum baking cycles:
24 hours @ 410°F (210°C)

Numero de Parte Belden: 33322, 33320, 33318, 33316, 33314, 33312, 33310, 33308, 33306, 33304, 33302, 33390, 33418, 33416, 33414

UL AWM Style 3044
300V, 90°C
(CSA Type CL902)
Product Description
Neoprene insulation has good heat aging
characteristics and is an excellent low-cost
motor lead wire. It may be considered for
use in hazardous locations and is being
used in explosion-proof motors recognized
by UL. 12 AWG and smaller sizes are dual
labeled UL and CSA.
Recommended maximum baking cycles:
24 hours @ 300°F (149°C) • 8 hours @ 325°F (163°C)
15 minutes @ 450°F (232°C)

UL AWM Style 3046, 3048, 3049
600V, 90°C
(CSA Type CL903 available as shown)
Product Description
Neoprene insulation has good heat aging
characteristics and is an excellent low-cost
motor lead wire. It may be considered for
use in hazardous locations and is being
used in explosion-proof motors recognized
by UL. 12 AWG and smaller sizes are dual
labeled UL and CSA.
Recommended maximum baking cycles:
24 hours @ 300°F (149°C) • 8 hours @ 325°F (163°C)
15 minutes @ 450°F (232°C)

Numero de Parte Belden: 31520, 31518, 31516, 32518, 32516, 31514, 31512, 31510, 31508, 31506, 31504, 31502, 31501, 31590, 31500

UL AWM Style 3190
300V, 105°C
(CSA Type CL1052)
Product Description
This insulation is chlorosulfonated
polyethylene. Hypalon insulation has
excellent heat resistance, color stability
and electrical properties. Hypalon is
recommended for motor leads for Class
130(B) insulation systems. It may be
considered as an alternative to Silicone
rubber to withstand 155°C varnish
baking temperatures, but is not suitable
for operating temperatures above
Class 130(B).

5000V
High-Voltage Hypalon
Product Description
This insulation is chlorosulfonated
polyethylene. Hypalon insulation has
excellent heat resistance, color stability
and electrical properties.

Numero de Parte Belden: 34922, 34920, 34918, 34916, 34914, 36108, 36106, 36104, 36102, 36101, 36190, 36100, 36140

UL AWM Style 3199

300V, 105°C
(CSA Type CL1054)
Product Description
This insulation is a chemically cross-linked
polyethylene applied in a single extrusion.
This construction has excellent thermal
aging characteristics, moisture resistance,
and solvent resistance. It provides an
economic alternative to Hypalon® where
extreme flexibility is not required. The
insulation resists deformation when
subjected to momentary high temperatures
in customer assembly processes.
Recommended maximum baking cycles:
24 hours @ 300°F (149°C) • 12 hours @ 325°F (163°C)
8 hours @ 350°F (177°C)

UL AWM Style 3173, 3195, 3196
600V, 125°C
(CSA Type CL1251)
Product Description
This insulation is a chemically cross-linked
polyethylene applied in a single extrusion.
This construction has excellent thermal
aging characteristics, moisture resistance,
and solvent resistance. It provides an
economic alternative to Hypalon where
extreme flexibility is not required. The
insulation resists deformation when
subjected to momentary high temperatures
in customer assembly processes. The
356-series of XL-DUR is recommended
for Class 130(B) as motor leads.
Recommended maximum baking cycles:
24 hours @ 300°F (149°C) • 12 hours @ 325°F (163°C)
8 hours @ 350°F (177°C)

Numero de Parte Belden: 35722, 35720, 35718, 35716, 35622, 35620, 35618, 35616, 35614, 35612, 35610